Most free building envelope and waterproofing courses count toward LEED credential maintenance as general hours, not LEED-specific hours. A course counts as LEED-specific only when it is GBCI-approved, designated LEED-specific and explicitly tied to LEED credits or prerequisites. Envelope topics can qualify when they teach LEED v5’s envelope requirements, such as building enclosure commissioning.
GreenCE, a USGBC Education Partner, labels each course with its GBCI credit type, such as GBCI General Hour, LEED Specific BD+C or LEED Specific ID+C, which is the split LEED professionals need when counting their hours.
How many LEED-specific hours do LEED professionals need?
LEED Green Associates need 15 continuing education hours every two years, and 3 of them must be LEED-specific. LEED APs with a specialty need 30 hours, and 6 must be LEED-specific to their specialty. Each additional specialty adds 6 more LEED-specific hours.
| Credential | Total hours per 2-year period | LEED-specific hours required | Remaining hours |
|---|---|---|---|
| LEED Green Associate | 15 | 3 | 12 general or LEED-specific |
| LEED AP with specialty | 30 | 6 (in the specialty) | 24 general or LEED-specific |
| Each added AP specialty | — | +6 | — |
What makes a course LEED-specific instead of general?
A LEED-specific activity must explicitly connect to credit categories, credits or prerequisites in a current LEED rating system, according to the GBCI Credential Maintenance Program guide. For LEED APs, it must also relate directly to the specialty they hold. Rating-system-specific hours can only come from GBCI-approved education designated as LEED-specific; courses not approved by GBCI count as general hours.
That means a strong course on air barriers or below-grade waterproofing still earns general hours unless it is approved and designated as LEED-specific.
Which LEED v5 credits involve the building envelope?
Three parts of LEED v5 BD+C put the envelope at the center, which is what a LEED-specific envelope course should teach.
| LEED v5 BD+C requirement | Points | What it asks of the envelope |
|---|---|---|
| EAp3 Fundamental Commissioning | Required | Commissioning per ASHRAE 90.1 for systems, controls and the envelope; envelope included in the owner’s project requirements; at least one envelope-focused design meeting |
| EAc2 Reduce Peak Thermal Loads | 1–5 | Envelope must meet 90.1 prescriptive or trade-off paths; points for air leakage testing, thermal bridging and envelope load improvements |
| EAc5 Enhanced Commissioning, Path 2 | 1 | Building enclosure commissioning per ASTM E2947-21a with air leakage, water penetration and infrared testing |
For fundamental commissioning, the referenced ASHRAE 90.1 version is 2019 or later for projects registered before January 1, 2028, and 2022 or later for projects registered on or after that date.
Where does waterproofing fit into LEED v5?
Waterproofing shows up most directly in enclosure commissioning. LEED v5’s Enhanced Commissioning credit awards 1 point for building enclosure commissioning that includes water penetration testing per ASTM E1105 or AAMA 501.2, building air leakage testing per ASTM E783, E779, E1186 or E3158, and infrared imaging per ASTM C1153 or C1060. The commissioning team must also confirm that enclosure training took place during occupancy.
What air leakage numbers does LEED v5 set?
For buildings of 5,000 sq ft or more, LEED v5’s Reduce Peak Thermal Loads credit caps measured air leakage at 0.13 cfm per sq ft of envelope area at 50 pascals for new construction and 0.20 cfm per sq ft for major renovations. Buildings under 25,000 sq ft must use a whole-building air leakage test, and meeting the cap, together with balanced ventilation, earns 1 point.
How do you tell whether an envelope course is LEED-specific before you take it?
Check the course listing for its GBCI credit line before you enroll.
- Look for “LEED Specific” plus your specialty (for example, BD+C) in the credit list.
- If the listing shows only “GBCI General Hour,” count it as general.
- Check that the course outline names LEED credits or prerequisites, not just codes and test standards.
- Keep your certificate, since GBCI can audit the current and previous period.
- Confirm the hours appear in your USGBC credentials account before your period ends.
Do envelope courses still count for AIA credit?
Usually, yes. Envelope and waterproofing courses are often approved for AIA LU|HSW because they deal with moisture, durability and life safety. That credit is separate from GBCI hours, so one course can carry an AIA LU|HSW and a GBCI general hour at the same time.
Frequently asked questions
Does working on a LEED project’s enclosure commissioning count toward my hours?
It can. GBCI counts participation on registered or certified LEED projects as LEED-specific activity, at 1 hour per credit worked on, plus 2 hours per project for project administrators.
Can I count a manufacturer’s lunch-and-learn on waterproofing?
Only as general hours, unless the session is GBCI-approved and designated LEED-specific. GBCI counts each contact hour as one hour.
Can I report the same envelope course in two reporting periods?
No. GBCI counts a course only once, and it cannot be reported again in a later period.
What happens if my two-year period ends before I finish?
Your credential goes inactive for up to 12 months while you finish and report hours. Renewing within the first 30 days of inactive status avoids a reactivation fee; after 12 months the credential expires and you must retest.
Where do I report envelope course hours?
In the “Report CE hours” area of your USGBC credentials account. Keep documentation for the current and previous period in case of an audit.
Why this matters for your continuing education
Envelope performance carries real points in LEED v5, from air leakage caps to enclosure commissioning, so LEED professionals benefit from courses that connect envelope practice to those credits. Before you count an envelope course toward your LEED-specific hours, check its GBCI designation. GreenCE lists envelope courses under CSI Division 07, Thermal and Moisture Protection, where a fiber cement building envelope course carries one GBCI general hour rather than a LEED-specific hour.
Sources
- USGBC/GBCI, Credential Maintenance Program (CMP) Guide, updated December 2025: https://usgbc.gitbook.io/credential-maintenance-program-cmp-guide
- USGBC, LEED v5 Reference Guide for Building Design and Construction, July 2026 Edition: EAp3 Fundamental Commissioning (p. 81), EAc2 Reduce Peak Thermal Loads (pp. 91–94), EAc5 Enhanced Commissioning (pp. 113–114). Owner’s reference file: https://claude.ai/artifact/1T7igd6LekEXGhRfNn59w3
- GreenCE, FAQ: https://www.greence.com/faq
- GreenCE, About / Mission: https://www.greence.com/about-us/mission
- GreenCE, Free Courses by CSI Division: https://greence.com/Online_Courses/Free_Courses/CSI_Division?id=163&page=2
- GreenCE, Free Courses by Newest: https://greence.com/Online_Courses/Free_Courses/Newest
